STONE & COUNTERTOPS
Countertop Fabrication in
Los Angeles, CA
Fabrication is where a slab becomes your countertop. It’s the templating, cutting, shaping and polishing that determine whether the finished surface fits the cabinets exactly, whether the seams disappear and whether the edges feel right under your hand. ARD Remodeling fabricates quartz, granite, marble and other natural stone countertops for homes throughout Los Angeles and Surrounding Areas.
We measure digitally, cut precisely and finish every edge and cutout by hand, so the piece that arrives at your home fits the first time.
HOW WE FABRICATE
Cut to Fit,Finished by Hand
Digital Templating
Laser-accurate measurements of cabinets, walls and cutouts.
Precise Cutting
Slabs cut to the template with tight tolerances.
Edge Profiles
Eased, beveled, bullnose, ogee and mitered edges.
Seam Planning
Fewer, better-placed seams with matched veining.
From the digital template to the final edge, every piece is made for your space.
HOW IT WORKS
From Slab Selection to Finished Piece
Fabrication begins before the first cut. For homeowners across Greater Los Angeles, we help you choose the slab, then plan the layout on that specific slab so the most attractive areas end up where you’ll see them most, such as the island top or the run in front of the window. Seam locations are decided at this stage, not on installation day.
Once cabinets are installed and level, we template the space digitally. The template captures wall irregularities, overhangs, the sink and cooktop openings and the exact positions of faucet holes. The slab is then cut to that template, cutouts are made, and edges are shaped and polished to the profile you chose.
- Slab layout planned for veining and colorThe best part of the slab goes where you see it.
- Overhangs and support planned for islands and barsStable, safe and sized right.
- Sink, cooktop, faucet and outlet cutoutsCut precisely from the template.
- Backsplash and side splash pieces cut to matchOne consistent look across the kitchen.
READY TO CHOOSE YOUR SLAB?
Prefer to talk it through? We’ll call you back about your countertops.
THE DETAILS
Edges, Cutouts and Finishes
BEFORE WE TEMPLATE
What We Need on Templating Day
Accurate fabrication depends on an accurate template. A few things need to be in place before we measure so the countertop is cut to the final conditions of your kitchen or bathroom.
- Cabinets installed, secured and levelThe base the template is measured on.
- Sink and cooktop on site or specifications confirmedCutouts sized to the real models.
- Faucet and accessory hole locations decidedHoles placed exactly where you want them.
- Range, dishwasher and refrigerator positions finalNo surprises after the cut.
- Overhang and seating layout agreed for islandsComfortable seating, solid support.
READY TO SCHEDULE TEMPLATING?
OUR PROCESS
Template. Cut. Finish.
- 01
Slab Selection
Choose the material and slab; we plan the layout on it.
- 02
Templating
Digital measurement of the installed cabinets and cutouts.
- 03
Fabrication
Cutting, cutouts, edge shaping and polishing.
- 04
Installation
Pieces delivered, set, seamed and sealed by our team.
COUNTERTOP VISUALIZER
See Your Kitchen with a New Countertop
Upload a photo of your kitchen, tap the countertop and try quartz, granite or marble in your own space.
Your photo stays on your device. It is sent to us only if you request a visit or a call.
Pick a stone
Pick a stone, then tap the countertop.
- 1Take a photoPhotograph your kitchen or bathroom.
- 2Tap the countertopTap the countertop in your photo. You can add more areas.
- 3Pick a stoneChoose a quartz, granite or marble and see it on your counter.
- 4Send your requestLiked it? Book a master visit or request a call.
Stone patterns on screen are approximate: real slabs have their own veining and look different in different light. We recommend viewing a physical slab sample before you decide.
FAQ
Fabrication Questions
We’re here to help. If you don’t see your question here, feel free to contact us.
- Precise cutouts
- Custom edges
- Quality finishes
How long does fabrication take after templating?
Typically about one to two weeks, depending on the material, the complexity of the cutouts and edge work, and our current schedule. We confirm the timeline when we template.
Can you fabricate a countertop from a slab I bought myself?
Yes. Bring us the slab details or the slab itself and we’ll template, fabricate and install it at your Los Angeles home. We recommend confirming the slab size covers your layout before purchasing.
Where will the seams be?
We plan seams during layout, usually at sink or cooktop cutouts or in the least visible run, and we show you the plan before cutting.
Which edge profile is most popular?
Eased and mitered edges are the most requested for modern kitchens. Bullnose and ogee remain popular in traditional homes. We can show samples of each.
MORE FROM ARD REMODELING
Related Services
- CountertopsQuartz, granite, marble and natural stone countertops — templated, fabricated and installed with precision.Learn more
- Countertop InstallationLevel, secure and sealed installation of quartz, granite and natural stone countertops with clean, flush seams.Learn more
- Quartz CountertopsNon-porous, low-maintenance engineered quartz in marble-look, solid and concrete-look designs, fabricated and installed.Learn more
- Granite CountertopsNatural granite slabs, each one unique, cut and installed with heat-resistant, sealed surfaces built to last.Learn more
- Custom StoneworkWaterfall islands, fireplace surrounds, full-height backsplashes, shower walls and outdoor stone fabricated to your design.Learn more
- Kitchen RemodelingBeautiful kitchens that bring together thoughtful design, quality materials and expert craftsmanship.Learn more
Service areas
Countertop Fabrication Near You
Explore countertop fabrication across our Southern California service areas. Choose your city to request an estimate.
READY TO GET STARTED?
Let’s Fabricate Your Countertops
Contact us today for a free, no-obligation estimate anywhere in Los Angeles County.