ARD Remodeling Logo

CULVER CITY, CALIFORNIA

Culver City Home Remodeling Contractor

Planning a remodel in Culver City? With more than 10 years of experience, ARD Remodeling takes on kitchens, bathrooms, flooring, interior updates and whole-home projects here. Before anything is scheduled we visit the house, listen to what you want changed and send you the scope in writing, so you can compare it with the city's rules at your own pace.

Call Us (424) 402-5114 →
Living and dining room with a steel-framed window onto a courtyard garden, a round walnut dining table, an olive-green velvet sofa and a stacked-stone fireplace
  • Free estimates
  • Culver City and the Westside
  • Written scope first
  • Clean, orderly work

Our services

Projects we plan with Culver City homeowners

Remodeling requests in a city of mixed housing tend to look different from one house to the next. These are the three kinds we sort a request into during the first conversation.

  • A kitchen or bath that needs a rebuild

    Cabinets, counters, plumbing and tile in a room that no longer fits daily life.

  • Updating the living areas

    New floors, lighting, doors and paint across the rooms you use most.

  • A condo, townhome or shared building

    Association approval, shut-off notices and quiet hours come before the first day of work.

  • Reworking the floor plan

    Opening a wall, moving a kitchen or adding a bath. These changes bring plans and city review in early.

HOUSE BY HOUSE

Questions we ask at the first visit

A short list that shapes the scope, the sequence and the paperwork.

  • When was the house built?

    Older plumbing, wiring and fixtures change what we plan to check once walls are open.

  • Is there an association?

    Its rules on work hours, materials and notice can move your start date.

  • Which rooms share floors?

    Flooring that continues through several rooms is easier to price and lay as one job.

  • What bothers you most?

    Poor light, a cramped layout or worn surfaces each point to a different plan.

How remodeling permits work in Culver City

Culver City says home remodels, additions and mechanical, electrical and plumbing work need a Building Safety permit, and that an applicant creates an account in its permit portal to apply, pay fees and follow inspections. We read the list against your scope before the estimate is final, so the paperwork is part of the plan and not a surprise later.

  • Apply and follow along online

    The portal handles applications, plan check corrections, fees and inspection status.

  • Association letters

    The city's plumbing application page lists an HOA approval letter among documents that may be requested.

  • Ask about gray areas

    Building Safety can confirm whether a specific project needs a permit before you order materials.

PERMIT BASICS

What Culver City lists, in plain terms

This is a reading of the public list, not a ruling on your project.

  • Listed as needing a permit

    • New, replaced or relocated plumbing fixtures
    • Water heaters, new, replaced or relocated
    • Windows, new or replacement
    • Walls, new, replaced or removed
  • Listed as not needing one

    • Stopping leaks and clearing clogs without replacing pipe
    • Floor or wall tile
    • Wall coverings
    • Interior or exterior painting

Call Building Safety at (310) 253-5800 or send us your plan before you order materials.

PLANNING AHEAD

Questions worth settling before demolition

Most delays in a remodel come from questions nobody asked before the work began. We go through the building, the association and the city's list with you early, so the schedule reflects what is really involved.

  • Building rules firstAssociation notice, shut-offs and quiet hours go into the schedule at the start.
  • Paperwork you can followThe city's portal shows applications, corrections and inspection status in one place.
  • One clear scopeWhat is included, and in what order, is in writing before work begins.
Entry hall with a terrazzo floor, a skylight, a wood-framed glass front door, an oak bench with a basket, brass hooks and a jute runner

Work hours, neighbors and your building

Demolition, tile cutting and hauling are the noisy part of any remodel. A start date that works for the city is not always one that works for the people next door.

  • City construction hours

    Culver City lists 8 AM to 8 PM Monday through Friday, 9 AM to 7 PM on Saturday and 10 AM to 7 PM on Sunday.

  • Shared walls come first

    In a condo or townhome the association may set stricter hours and require notice before water is shut off.

THE FIRST DECISION

One big project or several phases

Many homeowners cannot rebuild everything at once. Here is how the two approaches usually compare.

  • One coordinated project

    Best for: Homes where several rooms share plumbing, floors or electrical

    • One schedule and one set of selections
    • Dust and disruption happen once
    • Finishes match from room to room

    Keep in mind: It needs more of the budget and more time away from normal routines.

  • Phased projects

    Best for: Homeowners spreading cost across seasons

    • Lets you live with the first change before the next
    • Smaller decisions at a time
    • Easier to keep one bathroom or kitchen working

    Keep in mind: Floors, paint and wiring may be touched more than once, so the plan should be set at the start.

If your home is in a historic district

The city's Cultural Affairs staff reviews exterior alterations to landmark and significant structures, and some exterior remodels may need a Certificate of Appropriateness. Most interior kitchen and bathroom projects never touch this, but check the address before you plan new windows, doors or a facade change.

HOW IT WORKS

How a project in Culver City runs

  1. Step 1

    Walk-through at your home

    We see the rooms, measure and ask about the building, the association and how you live in the space.

  2. Step 2

    Scope and selections in writing

    Materials, fixtures and the order of work are set out so you can compare and decide.

  3. Step 3

    Permit and association check

    We match the scope to the city's list and your association's rules, then fix the sequence and start date.

  4. Step 4

    Work and final review

    The crew builds in the agreed order and we walk the finished rooms with you.

Good to know

Before you start in Culver City

Every point below comes from the source shown on its card, with the date we last checked it. Rules change, so confirm anything that affects your project directly with the source.

  • Official source

    Building Safety permits

    Culver City states that projects such as home additions and remodels, and mechanical, electrical and plumbing work, require a permit. Its online permit portal covers applications, fees, plan check corrections and permit and inspection status.

  • Official source

    Where to go

    Building Safety is on the second floor of City Hall, 9770 Culver Blvd., and can be reached at (310) 253-5800. The city lists City Hall hours as Monday through Friday, 7:30 AM to 5:30 PM, and notes that it is closed on alternating Fridays.

  • Official source

    Which work needs a permit

    The city's list names new, replacement or relocated plumbing fixtures, water heaters, windows and walls as items needing a permit, and floor or wall tile, wall coverings and painting as items that do not. The list is partial, and all work must follow state law and the Municipal Code whether or not a permit applies.

  • Official source

    Construction hours

    The city's Enforcement Services page lists permitted construction hours of 8 AM to 8 PM Monday through Friday, 9 AM to 7 PM on Saturday and 10 AM to 7 PM on Sunday.

  • Official source

    Historic districts

    Culver City has three designated historic districts, on Braddock Drive, Lafayette Place and McConnell Boulevard. Exterior alterations to landmark and significant structures go through Cultural Affairs staff review and may need a Certificate of Appropriateness.

FAQ

Remodeling questions in Culver City

Direct answers to what homeowners ask us most. If your question is not here, call or send a request.

Call Us (424) 402-5114 →
  • Culver City
  • Permits
  • Clear scope
Which parts of Culver City do you serve?

Culver City is on our service-area list, as are nearby Westside cities such as Los Angeles, Santa Monica and Beverly Hills. Send your address and we will confirm that a visit works for your location.

Is there a permit portal for Culver City projects?

Yes. The city runs an online portal where applicants create an account to submit applications, pay fees, answer plan check corrections and follow inspections. Larger or layout-changing jobs are best discussed with Building Safety first.

Are tile or paint jobs on the city's permit list?

The city's public list places floor or wall tile, wall coverings and painting among items that do not need a permit. Plumbing fixtures, windows and walls appear on the list of items that do, and the list says other work may need approval too.

When can contractors work on a weekend?

The city's enforcement page lists Saturday construction from 9 AM to 7 PM and Sunday from 10 AM to 7 PM. Your own association or neighbors may prefer quieter days, so we agree on a schedule with you.

Does a historic district affect my kitchen remodel?

Interior work is rarely the concern. The city reviews exterior alterations to landmark and significant structures, so ask Cultural Affairs about any change to windows, doors or the facade.

How do I get started?

Request a free estimate on this page or call (424) 402-5114. Photos of the rooms and a short list of problems make the first visit more useful.

Service area

Also serving near Culver City

We work across Riverside, Orange, Los Angeles and San Bernardino counties. Call or send a request and we will confirm your address.

READY TO GET STARTED?

Planning a remodel in Culver City?

Tell us about your home and your plans. We will confirm the details and set up your free estimate.

Call Us (424) 402-5114 →